Description
Remote drill-pipe wipe-down support for the Americas
Pipe Wipe Pro is designed for drill-floor wipe-down and rack-back work where crews need to manage drilling fluid and cutting swarf on drill pipe or tool joints. Its circular nitrile wiping element and guarded hand-grip area create a defined contact point away from the pipe surface. CK Loosbrock USA can help customers across the Americas compare the PRO 1200 and PRO 1500 configurations and confirm current manufacturer documentation for the intended fluid and temperature conditions.
Best suited for
- Wiping drill pipe during pull-out and rack-back activities.
- Tool joints and larger drilling components that require the appropriate Pro size.
- Workflows seeking to reduce direct hand contact with residual drilling fluid and swarf.
- Crews wearing impact gloves who need a purpose-designed grip area.
- Operations within the manufacturer-stated temperature range and confirmed material compatibility.
Choosing between PRO 1200 and PRO 1500
The manufacturer lists two sizes to cover smaller drill pipe through bottom-hole assemblies and larger tool joints, but the public product page does not map a specific pipe diameter to each configuration. Measure the relevant pipe body and connection, identify the fluid and expected surface temperature, and describe the wipe-down sequence when requesting guidance. Do not select a model from its name alone. CK Loosbrock USA can confirm the current sizing information with the manufacturer before quotation.
Why source through CK Loosbrock USA
- Configuration review based on pipe body, tool-joint geometry and planned wipe sequence.
- Support checking the operating environment against stated NBR properties.
- Current manufacturer-information and quotation coordination for the Americas.
- Help identifying complementary positioning tools for rack-back operations.
Manufacturer material data and features
| Property | Manufacturer-stated value |
|---|---|
| Colour | Black |
| Material | Nitrile rubber, NBR |
| Cross section | Circular |
| Hardness | 70 Shore A |
| Operating temperature | -20 to +80 °C |
| Elongation at break | 300% |
| Tensile strength | 12 MPa |
| Compression set | 25% |
- 25 mm NBR rubber cord.
- Grip sized to allow use with impact gloves.
- Raised rubber flange intended to reduce splash and backflow toward the hand.
- Two configurations for smaller pipe through larger drilling joints.
Application guidance
Build Pipe Wipe Pro into the approved drill-floor procedure before use. Confirm where the operator will stand, how the pipe will move, where residues will be directed and how the tool will be removed without entering a pinch point. Use the selected configuration only on the pipe or tool-joint geometry reviewed for the task. The raised flange supports splash management, but fluid containment, hygiene and exposure controls remain part of the site’s overall procedure.
Safety and use limitations
- Review the current safety data for the drilling fluid and residues before selecting NBR equipment.
- Do not assume compatibility with every chemical because the product uses nitrile rubber.
- Remain within the manufacturer-stated -20 to +80 °C operating range.
- Wear the personal protective equipment specified for the fluid, swarf and drill-floor task.
- Keep hands, clothing and the tool clear of rotating equipment and pinch points.
- Inspect the rubber cord, hand grip and raised flange before use and remove damaged equipment from service.
- Follow the driller’s instructions and the approved rack-back or pull-out procedure.
Available documentation
- Official Pipe Wipe Pro product page and material data
- Offshore Handling Systems safety-data resources
Frequently asked questions
What is Pipe Wipe Pro made from?
The manufacturer specifies a circular, 25 mm nitrile rubber cord with a black finish and a hardness of 70 Shore A.
What temperature range is listed?
The official product page states an operating range from -20 to +80 °C. Product and fluid temperature should be considered.
Which configuration fits my drill pipe?
Provide the pipe-body and tool-joint dimensions for confirmation. The public page lists PRO 1200 and PRO 1500 but does not publish a diameter mapping.
Does the flange eliminate exposure to drilling fluids?
No. It is described as protection against splash and backflow, but site controls, PPE and fluid-specific procedures still apply.
What should be included in an enquiry?
Provide pipe and joint dimensions, fluid type, temperature range, task sequence, quantity, documentation requirements and delivery location.
Request current sizing guidance, documentation and a quotation for Pipe Wipe Pro from CK Loosbrock USA.
Related products include the Drill Pipe Connection Guide and Drill Pipe Set Back Tool. Browse the Hands Free Working range.
Request Availability and Pricing
Contact CK Loosbrock for current availability, pricing, model selection or specific handling requirements for Pipe Wipe Pro.
Please include the required product code, quantity and delivery location with your enquiry.
sales-usa@ckloosbrock.com
sales-europe@ckloosbrock.com
As the official stocking distributor for Offshore Handling Systems in the Americas, We maintain inventory ready to ship directly from our facility in Conroe, Texas.
