Description
Organized storage for hands-free tools in the Americas
The Hands Free Tools Storage Station provides a dedicated location for keeping Offshore Handling Systems handling tools accessible, separated and visible between tasks. Its open layout supports routine housekeeping on rig floors, catwalks, pipe decks and other controlled work areas where loose equipment can create clutter. CK Loosbrock USA can support customers across the Americas with station or starter-kit selection, documentation and a quotation based on the tools that need to be stored.
Best suited for
- Rig-floor and deck areas that use several long-handled push, pull and positioning tools.
- Facilities that want a defined storage point for pre-use checks and end-of-shift returns.
- Crews introducing an initial group of Offshore Handling Systems hands-free tools.
- Work areas where weather protection and rapid visual access are important.
- Sites that want space for a laminated area-audit or contents sheet.
Choose the station or starter kit
Order the storage station by itself when the required tools are already known or already on site. The manufacturer also lists a starter kit that combines one station with two 1500 mm General Cargo Handling Tools, one 1500 mm Drill Pipe Handling Tool, one 1500 mm Drill Pipe Casing Tool and one 1500 mm Drill Pipe Set Back Tool. Confirm that this default mix matches the operation before ordering. Tool selection must follow the load, pipe diameter, work area and approved handling procedure, not simply the available storage capacity.
Why source through CK Loosbrock USA
- Help comparing the standalone station with the manufacturer-listed starter kit.
- Review of the intended tool mix and long-handle storage requirements.
- Access to the current manufacturer page and cabinet technical drawing.
- Quotation and delivery coordination for customers across the Americas.
Manufacturer configuration and features
| Configuration | Product code | Manufacturer-listed contents |
|---|---|---|
| Hands Free Tools Storage Station | HFTWS001 | Storage station |
| Hands Free Starter Kit | HFTWS002 | Station and five listed handling tools |
- Robust medium-density polyethylene construction.
- Secure mounting clips intended to hold tools in place.
- Capacity for up to ten handling tools.
- Side attachments that can accommodate longer custom models.
- Over-canopy intended to protect stored tools from weathering.
- Recessed back-wall area for a laminated audit or contents sheet.
Placement and housekeeping guidance
Select a mounting position that keeps tools accessible without obstructing walkways, escape routes, controls or lifting activities. Check the wall or supporting structure, mounting method and local installation requirements before fitting the station. Assign every stored tool a position and include visual condition checks in the area routine. Return clean tools after use and follow each tool’s own inspection, storage and operating instructions. The station organizes equipment, but it does not verify that a tool is suitable or serviceable.
Safety and use limitations
- Installation and mounting must be reviewed by competent site personnel.
- Do not place the station where stored tools project into a travel or escape path.
- Confirm that clips are suitable for each tool before leaving equipment unattended.
- Do not exceed the manufacturer-stated capacity of ten handling tools.
- Inspect the station, clips, canopy and mounting points as part of local maintenance routines.
- Store only clean, inspected tools and quarantine damaged equipment separately.
- Follow the current instructions for every individual handling tool in the station.
Available documentation
Frequently asked questions
How many tools can the station hold?
The manufacturer states that the station can hold up to ten handling tools. The actual mix should also be checked for length, attachment shape and site access.
What is included in the starter kit?
The listed kit includes a station, two General Cargo Handling Tools and one each of the Drill Pipe Handling, Casing and Set Back tools, all in the stated 1500 mm configurations.
Can longer custom tools be stored?
The manufacturer describes modified side attachments for longer custom models. Confirm the exact tool dimensions and station arrangement before ordering.
Does the station replace tool inspection?
No. It provides organized storage only. Each tool still requires the pre-use, post-use and periodic checks specified by the manufacturer and site procedure.
What details help with a quotation?
Provide the required station or kit, the tools to be stored, available mounting area, installation location, quantity and delivery destination.
Request current documentation, configuration guidance and a quotation for the Hands Free Tools Storage Station from CK Loosbrock USA.
Review the included Drill Pipe Handling Tool, Drill Pipe Casing Tool and Drill Pipe Set Back Tool, or browse the OHS product range.
Request Availability and Pricing
Contact CK Loosbrock for current availability, pricing, model selection or specific handling requirements for Hands Free Tools Storage Station.
Please include the required product code, quantity and delivery location with your enquiry.
sales-usa@ckloosbrock.com
sales-europe@ckloosbrock.com
As the official stocking distributor for Offshore Handling Systems in the Americas, We maintain inventory ready to ship directly from our facility in Conroe, Texas.
